Resetting a Compact ICS?

Resetting a Compact ICS?

NewsGroups | Search | Tools
 comp.dcom.sys.nortel  Post an article  get this group's latest topics as an RSS feed add this group's latest topics to your My MSN content add this group's latest topics to your My Yahoo content  add this group's latest topics to your Google content  YahooMyWeb Yahoo!  Google Google  Windows Live Favorites Windows Live  del.icio.us del.icio.us  digg digg  Add to Netscape Netscape
Subject Author Date
Resetting a Compact ICS? RonB 03-12-2005
Posted by RonB on March 12, 2005, 10:30 am
If you were  Registered and logged in, you could reply and use other advanced thread options


I'm working on a Compact ICS with DR2 software. It's got sixteen
station ports -- all work fine with a 7208 -- none work with a 7310 or
a 7324 -- so I can't program it.

It has a working ATA port and I can get into the I-RAD with Norstar
Remote Utilities, but I don't know the System ID (which, I'm told, is
the default password for I-RADs).

F**SYSID times out on the 7208 -- so no luck getting the SYS ID that
way.

Is there any way to force this system to "ground zero" so I can get a
programming phone to work on it? I notice there is a small hole by the
emergency RJ-11 port, is this a reset button of some kind?

The original reason I got roped into looking at this system (via a
friend of a friend) is to get the Star Talk Flash (1.7.0) working (and
it seems to be fine -- it just can't see the switch). They've been
running one phone on this system for about a year. They need a total of
five phones and two lines -- would a Norstar 3x8 with DR5 work with
this release of Star Talk Flash?

Sorry to be so wordy. Any advice appreciated.

Thanks,

--
RonB



Posted by Aaron Pearson on March 15, 2005, 11:03 am
If you were  Registered and logged in, you could reply and use other advanced thread options


Get an External RAD and connect to laptop/KSU Port. It has it's own
password. However it may not see it if 7310 don't work. Worth a try.
> I'm working on a Compact ICS with DR2 software. It's got sixteen
> station ports -- all work fine with a 7208 -- none work with a 7310 or
> a 7324 -- so I can't program it.
>
> It has a working ATA port and I can get into the I-RAD with Norstar
> Remote Utilities, but I don't know the System ID (which, I'm told, is
> the default password for I-RADs).
>
> F**SYSID times out on the 7208 -- so no luck getting the SYS ID that
> way.
>
> Is there any way to force this system to "ground zero" so I can get a
> programming phone to work on it? I notice there is a small hole by the
> emergency RJ-11 port, is this a reset button of some kind?
>
> The original reason I got roped into looking at this system (via a
> friend of a friend) is to get the Star Talk Flash (1.7.0) working (and
> it seems to be fine -- it just can't see the switch). They've been
> running one phone on this system for about a year. They need a total of
> five phones and two lines -- would a Norstar 3x8 with DR5 work with
> this release of Star Talk Flash?
>
> Sorry to be so wordy. Any advice appreciated.
>
> Thanks,
>
> --
> RonB
>




Similar ThreadsPosted
Resetting Service Processor in OPTera 3500 February 20, 2006, 10:54 pm
Resetting Password For Admin on OPTera 3500 May 3, 2008, 2:41 am
Compact ICS and analog phones February 3, 2006, 3:10 pm
Compact ICS Phone system November 12, 2006, 3:28 am
Compact ICS & Meridian Phone Compatibility May 3, 2005, 5:57 pm

other useful resources:
The Federal Communications Commission (FCC)
Telecommunications Industry Association
Electronic and Software Security Products and Services
International Telecommunication Union

Custom CGI Perl and PHP programming by 1-Script.com

Contact Us | Privacy Policy
The site map in XML format XML site map