Reset Supervisor Engine 720 to factory defaults ??

Reset Supervisor Engine 720 to factory defaults ??
NewsGroups | Search | Tools
User Password
Register Now! Lost Password?
 comp.dcom.sys.cisco  Post an article  get this group's latest topics as an RSS feed add this group's latest topics to your My MSN content add this group's latest topics to your My Yahoo content  add this group's latest topics to your Google content  YahooMyWeb Yahoo!  Google Google  Windows Live Favorites Windows Live  del.icio.us del.icio.us  digg digg  Add to Netscape Netscape
Subject Author Date
Reset Supervisor Engine 720 to factory defaults ?? Tobias Kines 11-21-2005
Posted by Tobias Kines on November 21, 2005, 3:32 pm
If you were  Registered and logged in, you could reply and use other advanced thread options
Hello,

how do i reset a Supervisor Engine 720 to the factory defaults ?

Thank you very much in advance,
Tobias

Posted by CiscoHeadsetAdapter.com on November 21, 2005, 10:31 pm
If you were  Registered and logged in, you could reply and use other advanced thread options
Tobias,

You can just erase startup config and reboot the card. It will bring the
card to the "factory default" state.

If you have a card in "hybrid" mode, you need to remove the main startup
config (in this mode you have one interface to both, switch and router
functionality). If you have a card in the Native mode, then you have to
remove configs in both modes - in the router and in the switch.

Good luck,

Mike
www.ciscoheadsetadapter.com


> Hello,
>
> how do i reset a Supervisor Engine 720 to the factory defaults ?
>
> Thank you very much in advance,
> Tobias



Posted by Tobias Kines on November 22, 2005, 5:54 am
If you were  Registered and logged in, you could reply and use other advanced thread options
CiscoHeadsetAdapter.com wrote:
> Tobias,
>
> You can just erase startup config and reboot the card. It will bring the
> card to the "factory default" state.
>
> If you have a card in "hybrid" mode, you need to remove the main startup
> config (in this mode you have one interface to both, switch and router
> functionality). If you have a card in the Native mode, then you have to
> remove configs in both modes - in the router and in the switch.
>
> Good luck,
>
> Mike
> www.ciscoheadsetadapter.com
>
>
>> Hello,
>>
>> how do i reset a Supervisor Engine 720 to the factory defaults ?
>>
>> Thank you very much in advance,
>> Tobias
>
>

Thanks Mike

Have a nice day,
Tobias

Similar ThreadsPosted
CISCO 7XX / 761 password reset or reset to factory defaults June 17, 2006, 7:39 am
Reset Ciscos to factory defaults November 10, 2005, 9:42 am
cisco340 reset to factory defaults May 13, 2008, 9:53 am
Reset Cisco uBR904 to factory defaults July 30, 2005, 5:27 pm
reset router to factory defaults w/o reboot November 11, 2006, 10:30 am
Migrating from supervisor engine 1a to supervisor 2, pfc2, msfc2. Any tips ? January 21, 2007, 4:32 pm
Supervisor Engine II-Plus March 30, 2005, 4:48 pm
restore factory defaults June 11, 2006, 5:18 am
Monitoring the supervisor engine on CAT 5xxxx November 1, 2007, 10:06 am
Cisco PIX 506 - restore factory defaults March 22, 2005, 3:15 pm

other useful resources:
The Federal Communications Commission (FCC)
Telecommunications Industry Association
Electronic and Software Security Products and Services
International Telecommunication Union

Custom CGI Perl and PHP programming by 1-Script.com

Contact Us | Privacy Policy
The site map in XML format XML site map