Reset Defaults on Catalyst 2950

Reset Defaults on Catalyst 2950
NewsGroups | Search | Tools
User Password
Register Now! Lost Password?
 comp.dcom.sys.cisco  Post an article  get this group's latest topics as an RSS feed add this group's latest topics to your My MSN content add this group's latest topics to your My Yahoo content  add this group's latest topics to your Google content  YahooMyWeb Yahoo!  Google Google  Windows Live Favorites Windows Live  del.icio.us del.icio.us  digg digg  Add to Netscape Netscape
Subject Author Date
Reset Defaults on Catalyst 2950 papers.box 02-16-2006
Posted by on February 16, 2006, 9:32 am
If you were  Registered and logged in, you could reply and use other advanced thread options
Hi,
how can i reset hardware factory defaults on a Cisco Catalyst 2930
without using a cable?

thanks


Posted by on February 16, 2006, 10:37 am
If you were  Registered and logged in, you could reply and use other advanced thread options
You could enter the command:

"wr erase"
and then do a reload

papers.box@gmail.com wrote:
> Hi,
> how can i reset hardware factory defaults on a Cisco Catalyst 2930
> without using a cable?
>
> thanks


Posted by on February 16, 2006, 10:54 am
If you were  Registered and logged in, you could reply and use other advanced thread options
Thanks Jones...

But i can't telnet the switch because i don't know its ip.

byez


Posted by Michael Müller on February 16, 2006, 12:18 pm
If you were  Registered and logged in, you could reply and use other advanced thread options
Hi,

so why don´t you connect via console cable ? ;-)
There´s no other way to be at least connected to the switch with
a console cable.
Turn the switch off (Power cable)
Turn it on while pressing for at least 5-10 secs the mode button.
now a dialog should appear. now you have accesss to the file system and
can delete the config file.

Mike

> Thanks Jones...
>
> But i can't telnet the switch because i don't know its ip.
>
> byez
>



Posted by on February 17, 2006, 5:42 am
If you were  Registered and logged in, you could reply and use other advanced thread options
Hi, Michael!

Because i don't have the blue cable. :)

Danke!


Similar ThreadsPosted
Complete Hardware Reset to Company Defaults on Catalyst 3750 April 19, 2006, 6:43 am
CISCO 7XX / 761 password reset or reset to factory defaults June 17, 2006, 7:39 am
Reset Ciscos to factory defaults November 10, 2005, 9:42 am
cisco340 reset to factory defaults May 13, 2008, 9:53 am
Reset Cisco uBR904 to factory defaults July 30, 2005, 5:27 pm
Reset Supervisor Engine 720 to factory defaults ?? November 21, 2005, 3:32 pm
reset router to factory defaults w/o reboot November 11, 2006, 10:30 am
Catalyst 2950T - Reset Password? October 4, 2006, 3:40 am
catalyst 2950 July 22, 2004, 2:49 pm
Catalyst 2950 December 23, 2004, 6:57 pm

other useful resources:
The Federal Communications Commission (FCC)
Telecommunications Industry Association
Electronic and Software Security Products and Services
International Telecommunication Union

Custom CGI Perl and PHP programming by 1-Script.com

Contact Us | Privacy Policy
The site map in XML format XML site map