|
Posted by John on January 18, 2006, 8:42 pm
If you were Registered and logged in, you could reply and use other advanced thread options
If it is Pri you will have to disable the D-Channels in 96 first then
disable the loops if the D-Channels are set to auto they should come back on
their own.
John 807
>I will be swapping out a NT5D12AD card that has two loops (56 & 57). I
> know I will need to DISL both loops, compare/the switches/jumpers on
> both card. Once I have the new card in, other than ENLL the two loops,
> are there any other commands I will need to do (any MSDL commands)?
>
| 
Yahoo! 
Google 
Windows Live 
del.icio.us 
digg 
Netscape 
XML site map