|
Posted by Doug McIntyre on March 29, 2007, 1:34 am
If you were Registered and logged in, you could reply and use other advanced thread options
>I need information about a replacement product for the cisco 2511 with
>16 x RJ45
>Which one can I use ? In the cisco doc I found as replacement the
>2610XM...but I don't think it has 16 x RJ45 ?!
Sure, a 2610XM would work just fine as a replacement. If you are
looking at new boxes, a 2811 would work better. Maybe the reason
you are confused is that these routers are modular. You have to add on
cards to make them do what you want. In your case, since you seem to
be looking for 16 asynchronous serial ports, you'd look to add on an
NM-16AS card or NM-32AS card to get 16 or 32 asynchronous serial ports.
>And also what about the cables for the 2511? Is ist possible that I
>can order additional cables for the 2511 ?
The same cables used on the 2511 are used on the NM-xxAS cards, so
they are current part #s. There's probably alot of those cables
floating around the used markets as well.
| 
Yahoo! 
Google 
Windows Live 
del.icio.us 
digg 
Netscape 
XML site map