|
Posted by Chris_D on January 12, 2006, 10:11 am
If you were Registered and logged in, you could reply and use other advanced thread options
I have a multi-point scenario with five Cisco 1300 bridges involved.
Only one of the non-root bridges can see the root bridge so I thought
it would be a good idea to set this non-root bridge up as a repeater
for the other bridges to use to contact the root bridge.
My question involves the config for the non-root bridges to contact
the root bridge via the repeater.
I have set the non-root bridges to use the mac address of the repeater
as their parent 1 address but I cannot see any authentication
activity on the parent or the repeater when the non-root bridges try
to connect.
The repeater authenticates fine through the root bridge and if I
change the parent 1 address on the non-root bridges to that of the
root bridge, all non-root bridges authenticate fine with our Cisco
ACS.
I have trolled through the Cisco site but I can only find basic
information such as "setting up the bridge as a repeater" etc
I feel I should mention that I have the bridges set up in a test
enviroment (large room) at the moment.
Any help greatly appreciated
Drop the ZZZ to reply
Cheers ...
| 
Yahoo! 
Google 
Windows Live 
del.icio.us 
digg 
Netscape 
XML site map