|
Posted by dennis on May 9, 2008, 1:31 am
If you were Registered and logged in, you could reply and use other advanced thread options
Hi,
currently I'm designing a new network for a customer. The design have
one core and a directly connected access layer---> no distribution
layer
This construct consist of two main locations. The connectivity between
the locations are 10Gbit. One Cat 6509 and on the other side a Cat
4506 each with 10Gbit linecards.
On the side there the Cat 6509 stands there is also needed solutionen
to make a remote user access possible.
Also the main location (cat 6509) there is the default route pointing
to the firewall which is connected on the 6509 Switch.
My questions are:
1. Is there any good design guide on the cisco side ?
2. What should I ask our customer to make decisions about the
hardware ? (how many customer,..)
3. Can I use an integrated service router like 38xx for the remote
user ?
4.What the best practices ?
kind regards
dennis
| 
Yahoo! 
Google 
Windows Live 
del.icio.us 
digg 
Netscape 
XML site map