Remote Office

User Password

Subject

Author

Date

Rasman99

07-09-2005

Hans Müller

07-14-2005

Rasman99

07-17-2005

Posted by Rasman99 on July 9, 2005, 12:34 pm

If you were Registered and logged in, you could reply and use other advanced thread options

Is it possible to have DDI at the 9150 end on the local BRI presentation
assuming MSN is configured from the network provider?

Posted by Hans Müller on July 14, 2005, 9:42 pm

If you were Registered and logged in, you could reply and use other advanced thread options

> Is it possible to have DDI at the 9150 end on the local BRI presentation

> assuming MSN is configured from the network provider?

Not that I know, you can configure a incoming number which rings on several
sets on the remote site, but no DDI

Posted by Rasman99 on July 17, 2005, 2:36 pm

If you were Registered and logged in, you could reply and use other advanced thread options

>> Is it possible to have DDI at the 9150 end on the local BRI presentation

>> assuming MSN is configured from the network provider?

> Not that I know, you can configure a incoming number which rings on

> several sets on the remote site, but no DDI

Thx for the response

Similar Threads	Posted
Remote Office	May 11, 2006, 12:33 pm
dst at branch office	March 13, 2007, 4:39 pm
Branch Office Solutions on a CS1000m	September 1, 2005, 10:12 am
Virtual Office Programming Instructions	September 6, 2005, 10:48 am
Virtual Office Programming Instructions	September 6, 2005, 10:48 am
Virtual Office Programming Instructions	September 6, 2005, 10:48 am
Branch office tunnel nailed up ???	October 10, 2007, 10:58 pm
1010 Branch Office Connection with no public network	August 2, 2005, 12:33 pm
Contivity 221 and Contivity 2700 Branch Office Tunnels	October 11, 2005, 11:06 am
Help with Remote Octel	May 17, 2006, 7:50 pm