|
Posted by ddickenson on December 14, 2007, 2:10 pm
If you were Registered and logged in, you could reply and use other advanced thread options
Is this some sort of a signaling channel?
>
>
>
> > I am attempting to set up my Option 81C with a Line-Side T1 connection
> > to an Asterisk server I've built. I inherited this system and
> > therefore have not built any loops for it. As I was going through a
> > PDF file that explains the configuration for the Meridian side I came
> > across a problem.
>
> > LD 17
> > REQ CHG
> > TYPE CEQU
> > --TDS
> > --CONF
> > --DLOP 37 24 ESF
> > --MODE PRI
> > SCH3218
>
> > The error message is ISA Package is restricted. I know that I do not
> > have any D Channel coming in from Bell because of restrictions on my
> > switch, but how do I make just a plain 24 channel t1 loop to the VoIP
> > server? I am a fairly new Nortel admin and some of the higher level
> > programming I just flat haven't seen yet.
> > Thanks in advance
> > -Drew
>
> Dick,
> atach the configuration for 1 chanel for LSE1,
> DES IVR
> TN 003 0 00 00
> TYPE 500
> CDEN 4D
> CUST 0
> WRLS NO
> DN 74631 0 MARP
> AST NO
> IAPG 0
> HUNT 6161
> TGAR 1
> LDN NO
> NCOS 0
> SGRP 0
> RNPG 0
> XLST 0
> SCI 0
> SCPW
> SFLT NO
> CAC_MFC 0
> CLS TLD DTN FBD XFA WTA THFD FND HTD ONS
> LPR XRA CWD SWD MWD RMMD SMWD LPD XHD SLKD CCSD LND TVD
> CFTD SFD MRD C6A CNID CLBD AUTU
> ICDD CDMD LLCN EHTD MCTD
> GPUD DPUD CFXD ARHA OVDD AGTD CLTD LDTA ASCD
> MBXD CPFA CPTA UDI RCC HBTD IRGD IAMD DDGA NAMA MIND
> NRWD NRCD NROD SPKD CRD PRSD MCRD
> EXR0 SHL SMSD ABDD CFHD DNDY DNO3
> CWND USRD CCBD BNRD OCBD RTDD RBDD RBHD FAXD CNUD CNAD PGND FTTC
> PLEV 02
> AACS NO
> MLWU_LANG 0
> FTR ISP 75
> DATE 17 OCT 2002
|