Re: HSRP with 1731 & 877 - Dialer interface is always up/up.

User Password

Subject	Author	Date
Re: HSRP with 1731 & 877 - Dialer interface is always up/up.	Merv	05-13-2008

Posted by Merv on May 13, 2008, 5:34 pm

If you were Registered and logged in, you could reply and use other advanced thread options

take a look at cisco doc

HSRP and Enhnaced Object Tracking

http://www.cisco.com/en/US/docs/switches/lan/catalyst3750/software/release/12.2_35_se/configuration/guide/swhsrp.pdf

you can configure to track the reachability of the next hop IP
addresss - i.e ISP edge router facing your router

Similar Threads	Posted
priority queueing over dialer interface	April 6, 2005, 11:50 am
Activating telnet on dialer interface	July 14, 2005, 6:46 am
Dynamic IP and Static IP on same Dialer Interface	August 19, 2008, 7:30 am
HSRP w/looped interface.	June 17, 2005, 11:18 am
Regarding to HSRP configured on VLAN Interface.	September 30, 2006, 9:14 pm
setting dialer enable-timeout with dialer profiles	July 28, 2008, 2:55 am
HSRP private IPs on Interface, Official IP as Standby IP	July 7, 2006, 7:41 am
HSRP monitor several interfaces switching to standby on failure of any active interface	May 10, 2008, 7:07 pm
bri and dialer	November 15, 2004, 4:30 pm
Re: dialer map	April 6, 2007, 10:18 am