|
Posted by Trendkill on August 15, 2008, 7:46 am
If you were Registered and logged in, you could reply and use other advanced thread options
> Thanks for your answer, but i am not in CatOS, on my cisco 6500, it's a
> IOS
>
> Trendkill a =E9crit :
>
>
> >>>> Thanks for your answer,
> >>>> do you know the process for put it "On" on the cisco 6500 ?
> >>>> Thanks
> >>>> headsetadapter.com a =E9crit :
> >>>>> Hi Mag,
> >>>>> Catalyst 3524XL definitely do not have MDIX capablitiy for the port=
s (you
> >>>>> can confirm it with "show interface capability" command). Catalyst =
6500 has
> >>>>> it on *some* blades, but you may need to enable it (it's off by def=
ault).
> >>>>> Good luck,
> >>>>> Mike
> >>>>> CCNP, CCDP, CCSP, CCVP, MCSE W2K, MCSE+I, Security+, etc.
> >>>>> CCIE Voice (in progress), CCIE R&S (next)
> >>>>> ------
> >>>>> Headset Adapters for Cisco IP Phones
> >>>>>www.ciscoheadsetadapter.com
> >>>>>www.headsetadapter.com
> >>>>>> Hi
> >>>>>> If i connect the C3524XL to a Cisco 6500 with a classic
> >>>>>> RJ45 cable, i don't have the link. If i use a crossover cable, i h=
ave the
> >>>>>> link.
> >>>>>> I think's that =A0C3524/6500 don't have auto mdi.
> >>>>>> Anyone know if i can said by the cisco IOS that the port are conne=
cted
> >>>>>> to another switch without a crossover cable ? "MDI by software"
> >>>>>> thanks
> >>>>>> mag
> >>> On the cat side I think it is : set port auto-mdix enable. =A0Not sur=
e
> >>> on the native side.
> >> Sorry, forgot the mod/port!
>
> >> set port auto-mdix mod/port {enable | disable}
>
> >http://www.cisco.com/en/US/docs/switches/lan/catalyst6500/catos/8.x/c...
It looks like the command is:
int mod/port
mdix auto
or
no mdix auto
http://www.cisco.com/en/US/docs/switches/lan/catalyst6500/ios/12.1E/native/=
command/reference/I1.html#wp1271678
| 
Yahoo! 
Google 
Windows Live 
del.icio.us 
digg 
Netscape 
XML site map