|
Posted by on May 29, 2008, 3:35 am
If you were Registered and logged in, you could reply and use other advanced thread options
> After a bit of testing I seem to have come to a stable solutions using
> my config above.
>
> When the Dialer1 interface is shutdown the config switches to NAT over
> Eth0/0.
>
> Upon re-activation of Dialer1, new NAT will start to go via Dialer1,
> but any existing connections will continue via Eth0/0 as long as
> Eth0/0 is up.
>
> So it seems to be working...
>
> Jack
As discussed above - does it fail over when you
unplug the DSL instead - or even maybe
shut the ATM interface.
My memory is that dialers are always UP.
This is not 100% though.
| 
Yahoo! 
Google 
Windows Live 
del.icio.us 
digg 
Netscape 
XML site map