|
Posted by dt1649651@yahoo.com on April 27, 2008, 10:38 am
If you were Registered and logged in, you could reply and use other advanced thread options
After adding this line
static (inside,outside) interface 172.31.1.3
with 172.31.1.3 being my PC's ip, then my PC can access the company
network thru Cisco VPN but this command applies to only one IP
address.
Trying this
static (inside,outside) interface 172.31.1.0 netmask 255.255.255.0
gives me an error.
My other PCs on the internal network still cannot use the Cisco VPN
Client.
Any advice is greatly appreciated.
Dt
|