|
Posted by Alpha@Beta.com on December 24, 2005, 11:47 am
If you were Registered and logged in, you could reply and use other advanced thread options
box (or Tri-BRI from an SP 384), or the V.35 box.
It takes a 'special' cable to get the pinouts correct, but the wiring
is in the integrators guide found on the Polycom Extranet site.
You can make the cable using one end of the light-blue ended cable
that came with the FX and a standard RJ-45 connector. I've done it
many times.
wrote:
>It is probably standard wiring, can check a cable if U need, but it only
>works with Polycom interface box (several models).
>>
>>>I have a Polycom Viewstation FX that has a warning
>>> label on the blue interface socket: "Connect only to
>>> viewstation IMUX. Failure to do so will result in
>>> system damage".
>>>
>>> In fact this blue socket provide a strange RJ45 with a key
>>> index pin. What does it means ? Can I plug there a
>>> normal quad BRI interface, with a green RJ45 socket,
>>> allowing the set to work with ISDN ?
>>>
>>> Is this a special Viewstation FX version that works
>>> with IP only ? How can I identify the type or version ?
>>>
>>> Thanks for your help
>>>.....................................................................................
>>
>> I have discovered that IMUX means Quad BRI unit.
>> It seems that I need a particular RJ45 cable, a light blue
>> indexed from one side and green (non indexed) from
>> the other.
>>
>> Unfortunally I have not. Anyone knows what is the
>> difference with a normal 8 pin RJ45 cable ?
>> Is it twisted ? Where can I found layout connection ?
>>
>> Thank you
>>
>>
>
| 
Yahoo! 
Google 
Windows Live 
del.icio.us 
digg 
Netscape 
XML site map