If you were Registered and logged in, you could reply and use other advanced thread options
Hope anyone can help me with this little problem:
I've got a pix 515e with 7.01 release. I made a static route pointing
to the inside interface; so im pinging a host and then ive got a static
route returning to the same interface. For example; my ip addresss is
10.10.80.113/16 trying to ping x.x.x.x. in my PIX (10.10.50.1/16 in the
inside interface) ive got a static route like this:
I think this wasnt possible with a release prior to 7.
what im doing wrong?
thank you
Posted by Lutz Donnerhacke on May 16, 2006, 11:25 am
If you were Registered and logged in, you could reply and use other advanced thread options
* opsvlc@gmail.com wrote:
> I think this wasnt possible with a release prior to 7.
It is still not possible with 7.x. With 7.x you can route between different
interfaces of the same security level and between VPN clients on the same
interface. You still can't use the pix as an router on the stick. You have
to use vlans at least.
Posted by on May 16, 2006, 11:58 am
If you were Registered and logged in, you could reply and use other advanced thread options
Yahoo! 
Google 
Windows Live 
del.icio.us 
digg 
Netscape 
XML site map