|
Posted by AM on December 14, 2005, 9:11 am
If you were Registered and logged in, you could reply and use other advanced thread options
POP3.demon.co.uk wrote:
> I have recently started to (attempted to) use a PIX 501 firewall on our
> network, the consequence being the MS VPN connection does not seem to be
> working properly.
>
> Being complete novices when it comes to PIX I need some advice on how to
> configure the PIX to pass the VPN traffic to a RAS server.
>
> The network set-up is:
>
> INTERNET <------>Netgear DG814 <------> PIX ------(Intranet)
>
> By intranet, I mean there are three servers connected to the PIX firewall.
> (Internet Server, Mail Server and the RAS Server).
>
> Basically, (I think!) I need to know how to route all PPTP traffic to the
> RAS server.
You need noto route but to do a static NAT from a public IP address to internal
servers. I don't know how many IP
addresses you have. If this so you can do a 1:1 static NAT, otherwise you can
"forward" only specific ports.
I don't have any link in this moment, but just search for "static NAt cisco PIX".
>
> If I have it totally wrong, please feel free to ridicule... Also if you are
> so kind as to reply, please pitch the answers as if you are explaining to
> the local village idiot, so I can understand
See you here back again
| 
Yahoo! 
Google 
Windows Live 
del.icio.us 
digg 
Netscape 
XML site map