|
Posted by John Agosta on June 5, 2008, 4:58 am
If you were Registered and logged in, you could reply and use other advanced thread options
> Hi all
>
> We have 3 Internet access circuits (2 DSLs and 1 T1) on single 1841
> router. Is it possible to dynamically load-balance outbound traffic across
> 3 circuits?
>
> Thanks.
> AxJ
>
If you are not running a routing protocol such as BGP between your ISPs,
you can creat 3 static/default routes, with each route pointing out each
facility.
If you are running a protocol, then things change, and more info is needed.
-ja
| 
Yahoo! 
Google 
Windows Live 
del.icio.us 
digg 
Netscape 
XML site map