|
Posted by John 807 on October 6, 2006, 4:57 pm
If you were Registered and logged in, you could reply and use other advanced thread options
John 807
>
>> Nortel Meridian1 Option 11c
>>
>> Hi,
>>
>> We have several 2616 phones with an additional "module" attached that
>> consists of a further 22 keys.
>> Questions:
>>
>> 1. What is the correct term for this "module"?
>> 2. Do these keys have exactly the same funtionality as the satndard 16
>> keys on a 2616?
>> 3. How do I program "one touch" phone numbers into these keys (and
>> presumably the standard 16 keys)?
>>
>>
>> many thanks
>>
>> ShuggyB
>>
>
> Think I may have worked this out. Can someone confirm this is all correct?
>
> Porgramming Speed Dials
> ========================
>
> If you are programming speed dials on a 22 Key expansion module, make sure
> the module is enabled:
>
> LD 11
> REQ: PRT
> TYPE: TN
> TN <Enter Required TN>
>
> Look for AOM, it should be set to 1 (2 if there are 2 AOMs attached?). If
> it is set to 0, module is not enabled.
>
>
> If you need to enable the 22 Key expansion module:
>
> LD 11
> REQ: CHG
> TYPE: 2616
> ECHG: NO
> <RETURN> until
> AOM: 1
> <RETURN> all the way out
>
>
> To add speed dial number to a key:
>
> LD 11
> REQ: CHG
> TYPE: 2616
> TN: <Enter Required TN>
> ECHG: NO
> <RETURN> until
> KEY: XX ADL 16 Y..Y (where XX is the key to be programmed and Y..Y is the
> phone number (include 9 for outside line))
> <RETURN> all the way out
>
>
>
> thanks
>
> ShuggyB
>
| 
Yahoo! 
Google 
Windows Live 
del.icio.us 
digg 
Netscape 
XML site map