|
Posted by adhkja on November 5, 2005, 11:22 pm
If you were Registered and logged in, you could reply and use other advanced thread options
I'm just guessing here:
Is it possible that the old 804 remembers that there should be a
different device at the end of the VPN tunnel? Maye some keys have to
be re-created on both ends again?
m
wrote:
>
>We have 4 offices connected by VPN.
>
>We had three Sonicwall devices, and one Di-804HV. Each device had three VPN
>entries to connect to every other device. Everything worked fine.
>
>One of the Sonicwalls died, so we purchased another DI-804HV. We set the
>same entries up in the new 804HV, but the unit will not talk to the other
>804HV unless it is the ONLY VPN entry. As soon as I add the other two
>entries, it stops working - though the other two entries DO work.
>
>As it stands now, each unit has entries for every other unit, and the
>Sonicwalls can see and talk to everyone, but the 804HV's cannot talk to each
>other. I have used both manual key and IKE. No difference. Both are B1
>revision hardware.
>
>Oddest effing thing I have ever seen... anyone with advice or experience
>with this let me know, otherwise the new one gets returned and we pickup a
>couple Netgear VPN appliances...
>
>Venger
>
| 
Yahoo! 
Google 
Windows Live 
del.icio.us 
digg 
Netscape 
XML site map