|
Posted by Atari_mark on April 30, 2006, 3:57 pm
If you were Registered and logged in, you could reply and use other advanced thread options
As you say about pins 2 & 3.
1) Turn the AP off
2) Short out pins 2&3
3) Turn the AP on and let it boot for 30 seconds
4) Turn the AP off
5) Remove the short from pins 2&3
This will reset the password but leave the other information in the AP. On
the Nortel variety the password is reset to "Nortel"
Regards
Mark
> > Hi,
> >
> > I have been given a Nortel e-Mobility AP-4121 (rebadged Symbol one). The
> > admin password has been reset and I can't find out any way of reseting
the
> > password. Using the serial connection I managed to get it's IP address
but
> > it won't respond to pings so I am stuck. Any ideas?
>
> The reset procedure for these requires that you short a pair of pins on
the
> serial console connection during powerup. I *think* it's pins two and
three,
> but you should be able to get docs off of symbol's web site.
>
> --
> Frank Sweetser fs at wpi.edu | For every problem, there is a solution
that
> WPI Network Engineer | is simple, elegant, and wrong. - HL
Mencken
> GPG fingerprint = 6174 1257 129E 0D21 D8D4 E8A3 8E39 29E3 E2E8 8CEC
| 
Yahoo! 
Google 
Windows Live 
del.icio.us 
digg 
Netscape 
XML site map