|
Posted by Gerald Harper on May 8, 2008, 3:44 pm
If you were Registered and logged in, you could reply and use other advanced thread options
DHCP is no problem.
LAN 1 can be programmed as the WAN, the rest are LAN ports. You can add
additional cards for more WAN connections. (Ethernet, T1, Serial, etc.)
It's a good VPN Server/ router. I have sent you some info.
> Hi a person gave me a Nortel contivity 1100 that he like setup at his
> business, but he did not give me any documantion. I can not find much
> info about it online. Does any one know any thing about this? What i
> want to know is does the WAN interface support DHCP. He has cable
> internet at the bussiness and the ISP only does DHCP. So if the WAN
> does not support DHCP then there is no sence in going fourth.
>
> Also there are 4 RJ-45 ports in the LAN 0 area and 1 RJ-45 port in the
> LAN 1 area. Plus one console RJ-45. Are any of these ports the WAN
> port? There are 2 slots above the RJ-45 ports and they look like
> expasion ports. Is this the only plase to put RJ-45 WAN cards. I
> know very little about this unit and can not learn much since there is
> little info out there
> thanks
> Steve
|