|
Posted by on April 28, 2008, 9:06 am
If you were Registered and logged in, you could reply and use other advanced thread options
I was informed by my network staff that only one DHCP server is
supported as a relay on the Nortel 8600. Is this correct? Here is what
I am trying to accomplish:
We have two DHCP servers, split 50/50, and would like to have the
switches relay to both addresses. Either simultaneously or
alternating. I know this is available with Cisco, but am unfamiliar
with Nortel.
This would be for redundancy purposes.
Any information you can provide will be greatly appreciated.
|