|
Posted by on August 18, 2006, 6:23 am
If you were Registered and logged in, you could reply and use other advanced thread options Thank's, I will try as soon as they arrive.
Bye
Davide
Dophi ha scritto:
> Yes, you can do it by using Qos function which can be an advanced ACL
> better than Cisco.
> If the firmware version of your 3510 is 4.x above, you can use Qos
> Wizard to setup it. It's an easy and quick way.
>
> d.marcoz@virgilio.it wrote:
> > Hi,
> > I have buyed a Nortel 3510-24T Ethernet Routing Switch , I have this
> > problem:
> > I want to setup 3 VLAN and 3 associated Virtual Interface VLAN with 3
> > differents subnet (assume A B & C).
> > I want enable rounting for VLAN's but I want deny inter-vlan routing.
> > Nortel 3510-24T have Access List like a router/switch CISCO?
> > It's possibile setting the switch that VLAN A see VLAN B but DONT see
> > VLAN C?
> > Thanks to all!
> >
> > David
|