|
Posted by nedtrilby@googlemail.com on July 10, 2008, 10:38 am
If you were Registered and logged in, you could reply and use other advanced thread options
I have set up DHCP server with scopes for data vlan 401 (network
10.1.1.0 /22) and voice vlan 990 (network 172.30.1.0 / 22). The DHCP
server is on the network 10.1.1.0 and it issues addresses OK to the
PCs connected. The IP phones are straight "out of the box" & are not
getting DHCP addresses - stops at "starting dhcp... " then "DHCP
server unreachable". All devices are connected into a single switch. I
have changed some of the settings such as the phone voice vlan number
(instead of DHCP) but no better result. How I can fix this? Thanks,
Ned
|