|
Posted by X-BarNone on May 7, 2007, 7:17 pm
If you were Registered and logged in, you could reply and use other advanced thread options
5 MB is all you have built then I would try the reinstall option. Log in
with option 983 and use hidden option 1 "reinstall"or "734678255". This will
completely reset back to out of box condition. You will need to reinitialize
the system after reset.
>>>
>>>> Hi,
>>>>
>>>> after changing extensions and recreating mailboxes, I have noticed an
>>>> issue with two of our phones - when logging into voicemail, it is
>>>> asking for "log" and password - as if there is no mailbox assigned to
>>>> the extension.
>>>>
>>>> However, after recreating the mailboxes multiple times I'm sure that I
>>>> have assigned it - I have followed the same procedure with the other 9
>>>> phones with no issues.
>>>>
>>>> Any ideas as to why the mailbox isn't linking to the extension?
>>> How many mailbixes do u think you have ? Sounds like 10 ),(basic call
>>> pilot).
>>>
>>> TerryS
>>>
>> Terry's right.
>>
>> Out of the box the CallPilot 100 only supports 10 mailboxes. IF you want
>> more you'll need a keycode. If you try to make a mail box and your only
>> option for the box is "INFO" and not "Subscriber", then you are out of
>> license. Also check and make sure that you have a valid extension
>> associated with each mailbox.
>>
>>
>
> Hi guys! Thanks for your input..
>
> I only have 5 other mailboxes active, and I am still able to make
> "subscriber" boxes. I have assigned the correct extension as well. I
> wonder, since the phones are in the same physical location and were
> probably wired at the same time, whether there is something physically
> that needs adjusting.
>
> Note that prior to reassigning extensions and changing DNs all was well..
>
| 
Yahoo! 
Google 
Windows Live 
del.icio.us 
digg 
Netscape 
XML site map