|
Posted by L C on December 5, 2005, 2:38 pm
If you were Registered and logged in, you could reply and use other advanced thread options
I had setup the Virtual PPTP as the IP of my server so that was my issue. I
am now getting the "There are currently no logon servers available to
service the logon request" message. Time to research that.
I am making progress though.
Thanks for the Help
Larry C
> LC ,
>
> Just setup 1 of these a couple weeks ago (dynamic IP but same setup for
> this). You have it setup correctly so far.
>
> Take a look at this
>
http://www.dlink.ca/support/gateway/di-804hv/manual/di804hv_pptp_server.exe
>
> Let me know - Can you PING the server? Can you Ping the LAN side of
> the router (192.168.0.1). When you say you can't get to the server how
> are you trying to do that? Are you trying to browse a workgroup,etc?.
>
> Bob
>
>
> L C wrote:
> > Hello,
> >
> > I have a Dlink DI 808HV running on a DSL line with a static public IP.
I am
> > trying to get XP and 2K client to connect to our server remotely and I
am
> > confused
> > The setup is as follows:
> > Public Static: Verizon IP
> > LAN 192.168.0.1
> > PPTP Virtual 192.168.2.1
> > When I connect to the VPN from my remote client I get an address of
> > 192.168.2.2. But then I have no way of getting to my server
192.168.0.23.
> > The router will not let me make my virtual IP on the same subnet as my
LAN.
> >
> > Do I need to add routes to my clients or router?
> >
> > I have gotten myself beyond confused.
> >
> > Thank You in Advanced.
> >
> > Larry C
>
| 
Yahoo! 
Google 
Windows Live 
del.icio.us 
digg 
Netscape 
XML site map