|
Posted by Darren Green on August 5, 2008, 4:19 pm
If you were Registered and logged in, you could reply and use other advanced thread options
Hi,
I need to NAT between 2 x networks matching the host element so that my
host in LAN 1 is translated to the same host address in LAN 2 e.g.
192.168.1.1 NAT's to 192.168.2.1
192.168.1.2 NAT's to 192.168.2.2
192.168.1.100 NAT's to 192.168.2.100..... etc
Ordinarily I would use the NAT 'match host' command on a router but I
assume I can do this on a PIX by doing something like
nat (inside, outside) 192.168.2.0 192.168.1.0 netmask 255.255.255.0
I don't have a PIX to hand to confirm that the mappings on the host
portion will be identical. Anyone know off the top of their heads.
Regards
Darren
| 
Yahoo! 
Google 
Windows Live 
del.icio.us 
digg 
Netscape 
XML site map