|
Posted by hals_left on June 30, 2006, 6:07 am
If you were Registered and logged in, you could reply and use other advanced thread options
Hi I have 4 sites with users creating IPSec L2TP and PPTP Windows VPN,
through thier company routers and terminating on an RRAS server here. I
support bot as users are Win2K and WinXP.
I am having a problem with two offices unable to make multiple client
tunnels, they are both small offices with <10 users, one can make 2 or
3, the other 1 or 2, - is it likely to be the routers that are the
bottleneck ?
All offices use ADSL and routers manged by teh priovider.
One office recently changed from an Inteligent Gateway T800 managed by
BT, to a DLInk 604T. The problem seems to have styarted then but many
other chanegs were made including new File servers and Client O/S
Upgrades.
One office also upgarded recently to M$ SBS and has been experimenting
with the the VPN settings on the cluient Automatic, Layer 2 and Point
2Point and this has helped a little but still max 3.
Both offices with larger numbers of users use Cisco 831 routers and
have no problems whatsoever, suing Layer 2 and Point2Point.
I think it is the routers but cannot tell them for sure, is ther any
specification on the routers documentation that could be used to
detrmine this ?
Any other info you need let me know.
Thanks.
|