|
Posted by on April 8, 2005, 6:23 am
If you were Registered and logged in, you could reply and use other advanced thread options
Hello,
I had a contact with someone who had a manual for a Mitel Entrepreneur
PBX system, unfortunately he seems to have disappeared. Does anyone
have this info anywhere? I'm looking for programming info, feature
codes, etc... please help!
Thanks.
|
|
Posted by Herk on April 15, 2005, 12:40 am
If you were Registered and logged in, you could reply and use other advanced thread options
I have the manual for the Mitel SX-20, but not the Entrepreneur (SX-10). I
honestly don't know how similar they would be, but you are welcome to any
of the info. Just let me know how you want it.
-------------------------------------
blackjs@gmail.com wrote:
> Hello,
> I had a contact with someone who had a manual for a Mitel Entrepreneur
> PBX system, unfortunately he seems to have disappeared. Does anyone
> have this info anywhere? I'm looking for programming info, feature
> codes, etc... please help!
> Thanks.
##-----------------------------------------------##
Article posted with Cabling-Design.com Newsgroup Archive
http://www.cabling-design.com/forums
no-spam read and post WWW interface to your favorite newsgroup -
comp.dcom.telecom.tech - 2146 messages and counting!
##-----------------------------------------------##
|
|
Posted by on April 17, 2005, 7:14 pm
If you were Registered and logged in, you could reply and use other advanced thread options
Welp, I have managed to document the following commands:
Extensions are 11 to 10.
Flash + 0 sends a hookflash to CO.
Speed calls are 201 to 214, programmable by command 36 for system-wide
or 63 for station speed call.
22 sends a redial.
30xx is a clear function. Example, 3012 clears daytime ring group 1.
3xxx and 4xxx == system wide programming options.
57/67 is do not disturb.
58 is CFA, 59 is CFB and 60 is CFNA.
66 is group pickup.
I think it differs from the SX-20 quite a bit... I have the manuals for
that one too.
|
|
Posted by 3z3k3l on April 15, 2005, 9:17 pm
If you were Registered and logged in, you could reply and use other advanced thread options
You can try the
Mitel
Portal
Good Luck!
|
|
Posted by on April 17, 2005, 7:15 pm
If you were Registered and logged in, you could reply and use other advanced thread options
edocs has nothing about the Entrepreneur. edocs has nothing about old
systems generally.
|
| Similar Threads | Posted | | Axxess DB programming | February 15, 2005, 7:05 pm |
| GGSN programming | June 7, 2006, 12:57 pm |
| Programming a DTMF Dialer | February 17, 2006, 7:35 pm |
| Stratagy ES - Menu Programming? | December 21, 2006, 2:33 pm |
| Partner AVS programming codes | May 15, 2007, 10:42 pm |
| Electra Professional II Programming | June 4, 2007, 4:09 pm |
| NEC Electra Elite IPK; need help programming | June 27, 2007, 4:53 pm |
| Norstar CICS w/ T7613 programming question | October 9, 2007, 1:43 pm |
| Re: Writeable Vodavi mach 1-4 pdf programming sheets | April 7, 2008, 9:28 pm |
| Mitel IP phone help | August 15, 2005, 11:36 am |
|
|
Yahoo! 
Google 
Windows Live 
del.icio.us 
digg 
Netscape 
XML site map