|
Posted by Ian Normington on April 6, 2005, 9:06 am
If you were Registered and logged in, you could reply and use other advanced thread options
I've successfully configured M1s to send traps to HP Openview and setup
Openview to correctly display the varbinds. I haven't got the info with me
at work at the moment - I'll dig it out from home later. If a remember
correctly, the MIB is very basic - it just defines a single trap. The
varbinds of this trap contain the alarm code, severity, etc.
> I have had no luck on sending directly to HP openview
> I send traps to OTM and then forward them
> I don't think you can send directly to HP
> for what it is worth
> good luck
> > Can anyone provide a reference (NTP or other) to Meridian 1 SNMP Alarm
> Agent
> > Configuration. Have a Meridian 1/Succession 3.0 Large System and want to
> > send SNMP Traps to an HP Openview Network Node Manager. The "Features"
> doc
> > refers to Software I/O Maintenace NTP ( LD117). LD117 basically
provides
> > info on how to configure an IP address for the SNMP Console but no info
on
> > available TRAPS, etc. (MIB level info).
> >
> > Thanks,
> > Pat
> >
> >
>
>
| 
Yahoo! 
Google 
Windows Live 
del.icio.us 
digg 
Netscape 
XML site map