Meridian SL1 - How to change the number of rings before hunting to voice mail

Meridian SL1 - How to change the number of rings before hunting to voice mail
NewsGroups | Search | Tools
User Password
Register Now! Lost Password?
 comp.dcom.sys.nortel  Post an article  get this group's latest topics as an RSS feed add this group's latest topics to your My MSN content add this group's latest topics to your My Yahoo content  add this group's latest topics to your Google content  YahooMyWeb Yahoo!  Google Google  Windows Live Favorites Windows Live  del.icio.us del.icio.us  digg digg  Add to Netscape Netscape
Subject Author Date
Meridian SL1 - How to change the number of rings before hunting to voice mail adepaolis 06-28-2006
Posted by on June 28, 2006, 2:43 pm
If you were  Registered and logged in, you could reply and use other advanced thread options
Is it possible to change the number of rings a 500 set rings before
hunting to voice mail? Right now when I call ext 7827, it will ring 5
or 6 times, I want to make it so that it rings only 2 times and then
hunts. I dont want to change all phone sets, just this specific one.
We have an older Meridian SL1 pbx.

thanks


home networking made easy, greater protection, less stress, introducing nm 5.0, 728x90
Posted by Bob on June 28, 2006, 6:20 pm
If you were  Registered and logged in, you could reply and use other advanced thread options

> Is it possible to change the number of rings a 500 set rings before
> hunting to voice mail? Right now when I call ext 7827, it will ring 5
> or 6 times, I want to make it so that it rings only 2 times and then
> hunts. I dont want to change all phone sets, just this specific one.
> We have an older Meridian SL1 pbx.
>
> thanks
>
Define older... what release?



Posted by RonB on June 28, 2006, 7:20 pm
If you were  Registered and logged in, you could reply and use other advanced thread options
On Wed 28 Jun 2006 02:43:49p, adepaolis@gmail.com, wrote:

> Is it possible to change the number of rings a 500 set rings before
> hunting to voice mail? Right now when I call ext 7827, it will ring
> 5 or 6 times, I want to make it so that it rings only 2 times and
> then hunts. I dont want to change all phone sets, just this specific
> one. We have an older Meridian SL1 pbx.

Yes.

You use the RCO prompt. It's normally set to 0 (the default) but it can
be set to 1 or 2 also. You define the number of rings in Load 15
(Customer Data Block). Look under RDR (Call Redirection), there you
will find CFN0, CFN1 and CFN2. These are normally set to 4 (rings) but
can be set to anything between 1 and 15. CFN0 applies to RCO 0, CFN1 to
RC0 1, and CFN2 to RC0 2.

Good luck.

--
RonB
"There's a story there...somewhere"

Posted by on June 29, 2006, 1:58 pm
If you were  Registered and logged in, you could reply and use other advanced thread options

RonB wrote:
> On Wed 28 Jun 2006 02:43:49p, adepaolis@gmail.com, wrote:
>
> > Is it possible to change the number of rings a 500 set rings before
> > hunting to voice mail? Right now when I call ext 7827, it will ring
> > 5 or 6 times, I want to make it so that it rings only 2 times and
> > then hunts. I dont want to change all phone sets, just this specific
> > one. We have an older Meridian SL1 pbx.
>
> Yes.
>
> You use the RCO prompt. It's normally set to 0 (the default) but it can
> be set to 1 or 2 also. You define the number of rings in Load 15
> (Customer Data Block). Look under RDR (Call Redirection), there you
> will find CFN0, CFN1 and CFN2. These are normally set to 4 (rings) but
> can be set to anything between 1 and 15. CFN0 applies to RCO 0, CFN1 to
> RC0 1, and CFN2 to RC0 2.
>
> Good luck.
>
> --
> RonB
> "There's a story there...somewhere"

When I go to LD 15, I receive this error:

ld 15
OVL309

Any ideas? Also, how to I check what revision I have?


Posted by RonB on June 29, 2006, 8:28 pm
If you were  Registered and logged in, you could reply and use other advanced thread options
On Thu 29 Jun 2006 01:58:50p, adepaolis@gmail.com, wrote:

> When I go to LD 15, I receive this error:
>
> ld 15
> OVL309
>
> Any ideas? Also, how to I check what revision I have?

From the Manual...

"OVL0309 You do not have access to that Overlay."

It means you have a limited access login. If you're in charge of that
switch you are going to need know at least the Level 1 password, or
have someone else change the access levels in your current login.

To check the software release, go to LD 22 and type ISS. Other useful
commands in LD 22 are ISSP (tells you the release and the names of any
patches in the software) and SLT, which tells about your license, how
many ports are used and how many you have left.

Good luck.

BTW, you should be able to go to LD 21 and print the CDB (Customer Data
Block), even though you are not allowed to change it -- unless the only
loads they are letting you into and LD 20 and LD 95 (not uncommon). If
you can get into LD 21, you can at least check to see were CFN0, CFN1
and CFN2 are set -- though it's likely they are at the default of four
rings.

--
RonB
"There's a story there...somewhere"

Similar ThreadsPosted
Changing number of rings before going to voice mail February 11, 2008, 4:43 pm
Meridian Norstar DDI number rings on 2 internal extensions? March 8, 2005, 1:14 am
control the change of TN number March 13, 2006, 10:56 am
Norstar NAM voice mail May 14, 2006, 8:01 pm
Norstar NAM voice mail May 14, 2006, 8:02 pm
Norstar Voice Mail DN vs Individual DNs April 28, 2005, 8:33 am
Can Norstar have DIDs to voice mail boxes May 1, 2006, 4:28 pm
transfering a call directly to Voice mail July 24, 2006, 6:57 pm
Voice mail informations, applications, systems... July 30, 2006, 7:44 am
Call pilot 4.0 ring no answer on voice mail July 16, 2007, 12:57 pm

other useful resources:
The Federal Communications Commission (FCC)
Telecommunications Industry Association
Electronic and Software Security Products and Services
International Telecommunication Union

Custom CGI Perl and PHP programming by 1-Script.com

Contact Us | Privacy Policy
The site map in XML format XML site map