|
Posted by JOHNTHEPHONEMAN on March 20, 2005, 3:30 pm
If you were Registered and logged in, you could reply and use other advanced thread options
Norstar Integrated Communications System
--------------------------------------------------------------------------------
Blocking the Paging from being broadcasted through your Norstar phone
To enter a programming session, follow the next few simple steps:
1) Press FEATURE * * 2 6 6 3 4 4
2) Enter Password: 2 6 6 3 4 4
Display will read: " Terminals & Sets"
Using the navigation keys, as displayed below, follow the next simple
steps:
3) Press: SHOW
Display will read: "Show Set: _ _" (Example: 221)
Enter the extension number that you want to change
4) Press: SHOW
Display will read: "221:Operator"
5) Press: SHOW
Display will read: "Line Access"
7) Press: NEXT
Display will read: "Capabilities"
8) Press: SHOW
Display will read: "Fwd no Answer"
9) Press: NEXT until the display reads: "Page Zone: 1"
10) Press the CHANGE softkey until the display reads: "Page Zone: None"
11) Press: NEXT
12) Press: RLS
Congratulations! You have successfully removed your phone from all
Paging Groups!
Rob wrote:
> I am installing a meridian norstar System Ver SP: 30nAH03 DR5
>
> I am wanting to set up the Zones for paging as i don't want one of
the
> phones to be included.
>
> I do not have any instructions for this unit, so I am getting the
> information from the internet. The instructions that I have found to
> set up zones is to go to Capabilities in the General Admin menu, but
> it is not there.
>
> Does any one know how to set zones for this unit.
>
> Also does anyone have a feature list for this version, as I seem to
be
> getting conflicting information on the web.
>
> Thanks
| 
Yahoo! 
Google 
Windows Live 
del.icio.us 
digg 
Netscape 
XML site map