|
Posted by foneguy39 on April 18, 2005, 4:42 pm
If you were Registered and logged in, you could reply and use other advanced thread options
My not be anyone is old enough to help me with this, but here it goes.
I have an Option 81C rls 21 with outbound CAMA trunks works great.
The trouble am have is I have a 51 rls 19. That's tie via 4 T-1's
all pri. I am tiring to send ANI to the 81C and have then have the 81c
send out the ANI info on the CAMA's.
I know you can see the CLID on the 81 from the 51.and sending ANI to
our outbound PRI's on the 81C. (I see it on my cell phone)
I can get calls to route out to the CAMA trunks but with out ANI info.
I have been told that a switch this old need a box to read the display
info
Anyone with an answer that works I will send them 5 digital line cards
a.e. vintage all working and tested
| 
Yahoo! 
Google 
Windows Live 
del.icio.us 
digg 
Netscape 
XML site map