MRTG

MRTG
NewsGroups | Search | Tools
User Password
Register Now! Lost Password?
 comp.dcom.sys.cisco  Post an article  get this group's latest topics as an RSS feed add this group's latest topics to your My MSN content add this group's latest topics to your My Yahoo content  add this group's latest topics to your Google content  YahooMyWeb Yahoo!  Google Google  Windows Live Favorites Windows Live  del.icio.us del.icio.us  digg digg  Add to Netscape Netscape
Subject Author Date
MRTG SuperSlueth 05-03-2006
---> Re: MRTG Seppo Mannisto05-04-2006
Posted by SuperSlueth on May 3, 2006, 6:07 pm
If you were  Registered and logged in, you could reply and use other advanced thread options
I'm trying to get mrtg to read the CPU load of a 836 router

I'm using OID 1.3.6.1.4.1.9.2.1.57.0&1.3.6.1.4.1.9.2.58.0 OIDVeiw
shows it's working ok, but MRTG does not show anything on the graphs

Please any ideas


Posted by Seppo Mannisto on May 4, 2006, 2:16 am
If you were  Registered and logged in, you could reply and use other advanced thread options
> I'm trying to get mrtg to read the CPU load of a 836 router
>
> I'm using OID 1.3.6.1.4.1.9.2.1.57.0&1.3.6.1.4.1.9.2.58.0 OIDVeiw
> shows it's working ok, but MRTG does not show anything on the graphs
>
> Please any ideas
>

I've seen same when i forgot to put 'gauge' on MRTG config.

Like this:
Options[router_cpu]: nopercent, gauge, growright

--
#seppo dot mannisto at uta dot fi

Posted by SuperSlueth on May 4, 2006, 4:00 am
If you were  Registered and logged in, you could reply and use other advanced thread options
Got gauge in and it still doesn't display any dat on the graph



On Thu, 4 May 2006 06:16:51 +0000 (UTC), Seppo Mannisto

>> I'm trying to get mrtg to read the CPU load of a 836 router
>>
>> I'm using OID 1.3.6.1.4.1.9.2.1.57.0&1.3.6.1.4.1.9.2.58.0 OIDVeiw
>> shows it's working ok, but MRTG does not show anything on the graphs
>>
>> Please any ideas
>>
>
>I've seen same when i forgot to put 'gauge' on MRTG config.
>
>Like this:
>Options[router_cpu]: nopercent, gauge, growright

Posted by jay on May 4, 2006, 9:11 am
If you were  Registered and logged in, you could reply and use other advanced thread options
Download NET-SNMP tools... then try SNMPWALK from dos command line to
see if the router has that OID..
you may need to try anothe OID since most of the 800 series may have
CPU OID in the OLD-CISCO-MIB, instead of like the other platforms who
have old and new.


Posted by SuperSlueth on May 4, 2006, 1:14 pm
If you were  Registered and logged in, you could reply and use other advanced thread options
Tried OidView and there is data being given on
1.3.6.1.4.1.9.2.1.57.0&1.3.6.1.4.1.9.2.1.58.0
but mrtg doesn't show anything in the graphs
the ATM and ethernet interface are working in mrtg




>Download NET-SNMP tools... then try SNMPWALK from dos command line to
>see if the router has that OID..
>you may need to try anothe OID since most of the 800 series may have
>CPU OID in the OLD-CISCO-MIB, instead of like the other platforms who
>have old and new.

Similar ThreadsPosted
PIX and MRTG November 5, 2004, 4:17 am
MRTG PIX December 14, 2004, 12:07 am
MRTG April 8, 2006, 4:52 am
MRTG and PIX November 17, 2006, 5:04 pm
BGP and MRTG May 22, 2007, 10:06 am
MRTG for a PIX August 17, 2007, 12:29 pm
MRTG (SNMP) through a PIX August 9, 2005, 11:29 am
MRTG and ASA appliance September 5, 2007, 1:39 pm
ASA5550 MRTG June 4, 2008, 10:57 am
Cisco 515e PIX + MRTG March 9, 2005, 3:32 pm

other useful resources:
The Federal Communications Commission (FCC)
Telecommunications Industry Association
Electronic and Software Security Products and Services
International Telecommunication Union

Custom CGI Perl and PHP programming by 1-Script.com

Contact Us | Privacy Policy
The site map in XML format XML site map