|
Posted by deisenhart1@comcast.net on March 28, 2007, 1:14 pm
If you were Registered and logged in, you could reply and use other advanced thread options
We recently upgraded our KSU to the MICS 7.0 cabinet from an old 8x24
cabinet with DR5 software.
We had all legacy M series phones, and slowly as they die I'm
replacing with T series phones.
My problem is that when I add a T7208 phone to the system, it is
operating in Legacy mode (where the message indicator not working, and
the little LCD icons for pickup, hold, etc are not functioning.
When I go into the set administration, the KSU seems to detect the
hardware at that phone extension as M7208 instead of T7208.
We have 3 T7316 phones on the system that detect as a T series and all
features work, so I know what the 7208 phones should be doing.
Any ideas?
Deacon Eisenhart
Country Club of York
| 
Yahoo! 
Google 
Windows Live 
del.icio.us 
digg 
Netscape 
XML site map