MICS 7.0 and PRI problem

MICS 7.0 and PRI problem
NewsGroups | Search | Tools
User Password
Register Now! Lost Password?
 comp.dcom.sys.nortel  Post an article  get this group's latest topics as an RSS feed add this group's latest topics to your My MSN content add this group's latest topics to your My Yahoo content  add this group's latest topics to your Google content  YahooMyWeb Yahoo!  Google Google  Windows Live Favorites Windows Live  del.icio.us del.icio.us  digg digg  Add to Netscape Netscape
Subject Author Date
MICS 7.0 and PRI problem Big Rich 10-29-2005
Posted by Big Rich on October 29, 2005, 2:48 am
If you were  Registered and logged in, you could reply and use other advanced thread options


Need some help installing a full PRI into a new MICS with DID targets and
incoming and outbound calling. Bought the PRI enabler, entered the keycodes
and seemed to take. But cannot see the PRI. Card keeps blinking green. We
are pretty sure the settings for ESF, Wink, Digit length etc are correct but
must be overlooking something. Any ideas?
Thanks




Pure Networks
Posted by John on October 29, 2005, 8:54 am
If you were  Registered and logged in, you could reply and use other advanced thread options


Are you sure the Pri is up? Did you change the trunk type from COT to DID
or whatever for the 23 B channels. Or the card type in maint.

John 807
> Need some help installing a full PRI into a new MICS with DID targets and
> incoming and outbound calling. Bought the PRI enabler, entered the
> keycodes and seemed to take. But cannot see the PRI. Card keeps blinking
> green. We are pretty sure the settings for ESF, Wink, Digit length etc are
> correct but must be overlooking something. Any ideas?
> Thanks
>




Posted by on October 29, 2005, 4:15 pm
If you were  Registered and logged in, you could reply and use other advanced thread options


Although your telco may tell you the PRI is up, there could still be
some issues between the CO and your site. If you're sure your settings
are good, call the Telco and have them do a loopback test both through
your equipment and to their demarc



Similar ThreadsPosted
MICS 6.1 October 26, 2005, 7:40 pm
Need Help with MICS / PRI / NAM February 27, 2006, 5:37 pm
MICS 6.1 going PRI November 4, 2006, 12:00 pm
MICS 6.1 Programming March 1, 2005, 6:17 am
MICS Setup August 1, 2005, 8:38 am
Nortel MICS...is it NI1 or NI2 October 6, 2005, 11:41 am
Adtran tsu-120 and MICS 1.1 July 25, 2008, 7:08 pm
Odd PRI problem on 81c April 4, 2006, 11:31 pm
problem with NAM vm box June 1, 2006, 10:52 am
Problem. December 21, 2006, 8:07 am

other useful resources:
The Federal Communications Commission (FCC)
Telecommunications Industry Association
Electronic and Software Security Products and Services
International Telecommunication Union

Custom CGI Perl and PHP programming by 1-Script.com

Contact Us | Privacy Policy
The site map in XML format XML site map