|
Posted by JM on April 15, 2007, 12:22 pm
If you were Registered and logged in, you could reply and use other advanced thread options
We want to put two Norstar phones in a remote office that connect via MCK
gateway/branch units back to our main office's Norstar MICS (r4 s/w). In
the main office we have about 12 computers in a workgroup, relatively light
internet usage, and a dynamic T1 voice/data product that gives us
approximately 768Kb symmetrical internet, burstable up to about 1.2Mb. In
the remote office we have "business class" DSL that provides approximately
1.5Mb down / 384Kb up. There also will be two PCs in the remote office
connected via VPN (if all goes as planned). These computers will see only
very light usage, and it's not likely that both Norstar phones will be used
at the same time. In fact, the phones won't be used much at all, and when
they are used it mostly will be for intercom/inter-office communications.
What are the gotchas here, and is there a better way of doing this?
thank you,
jm
| 
Yahoo! 
Google 
Windows Live 
del.icio.us 
digg 
Netscape 
XML site map