M-7324 with Key Lamp Module

M-7324 with Key Lamp Module
NewsGroups | Search | Tools
User Password
Register Now! Lost Password?
 comp.dcom.sys.nortel  Post an article  get this group's latest topics as an RSS feed add this group's latest topics to your My MSN content add this group's latest topics to your My Yahoo content  add this group's latest topics to your Google content  YahooMyWeb Yahoo!  Google Google  Windows Live Favorites Windows Live  del.icio.us del.icio.us  digg digg  Add to Netscape Netscape
Subject Author Date
M-7324 with Key Lamp Module Rob 01-02-2007
Posted by Rob on January 2, 2007, 12:00 pm
If you were  Registered and logged in, you could reply and use other advanced thread options
What is the trick to make 2 KLM's work with the M7324? Do they need to be
the same firmware Rev.?


Thanks,

Rob



Pure Networks
Posted by Dan J. Rudiak on January 2, 2007, 6:02 pm
If you were  Registered and logged in, you could reply and use other advanced thread options
Assuming you have a power adapter attached to them.

Unplug from wall jack, whilst the KLMs are flashing press the bottom two
right buttons and the bottom two left buttons on each KLM (a total of four
buttons on each KLM.) If done correctly, you should see the indicators go ON
and OFF sequentionally.

> What is the trick to make 2 KLM's work with the M7324? Do they need to be
> the same firmware Rev.?
>
>
> Thanks,
>
> Rob
>
>



Posted by Rob on January 3, 2007, 8:19 am
If you were  Registered and logged in, you could reply and use other advanced thread options
Thanks for the reply.

By power adapter, do you mean some sort of DC power injector similar to what
you need to make POE (Power Over Ethernet) devices work?

Rob


> Assuming you have a power adapter attached to them.
>
> Unplug from wall jack, whilst the KLMs are flashing press the bottom two
> right buttons and the bottom two left buttons on each KLM (a total of four
> buttons on each KLM.) If done correctly, you should see the indicators go
> ON and OFF sequentionally.
>
>> What is the trick to make 2 KLM's work with the M7324? Do they need to
>> be
>> the same firmware Rev.?
>>
>>
>> Thanks,
>>
>> Rob
>>
>>
>
>



Posted by Dan J. Rudiak on January 3, 2007, 9:52 am
If you were  Registered and logged in, you could reply and use other advanced thread options
Yep... If memory serves me well, it is a 24VDC convertor and it goes on the
Orange and Green pairs. It can be mount either under the desk and wire into
the jack or back in the wiring closet.

> Thanks for the reply.
>
> By power adapter, do you mean some sort of DC power injector similar to
> what you need to make POE (Power Over Ethernet) devices work?
>
> Rob
>
>
>> Assuming you have a power adapter attached to them.
>>
>> Unplug from wall jack, whilst the KLMs are flashing press the bottom two
>> right buttons and the bottom two left buttons on each KLM (a total of
>> four buttons on each KLM.) If done correctly, you should see the
>> indicators go ON and OFF sequentionally.
>>
>>> What is the trick to make 2 KLM's work with the M7324? Do they need to
>>> be
>>> the same firmware Rev.?
>>>
>>>
>>> Thanks,
>>>
>>> Rob
>>>
>>>
>>
>>
>
>



Posted by Rob on January 3, 2007, 12:11 pm
If you were  Registered and logged in, you could reply and use other advanced thread options
You would figure that the Nortel-trained reps selling me this stuff would
know this, eh?

Thanks again,

Rob

> Yep... If memory serves me well, it is a 24VDC convertor and it goes on
> the Orange and Green pairs. It can be mount either under the desk and wire
> into the jack or back in the wiring closet.
>
>> Thanks for the reply.
>>
>> By power adapter, do you mean some sort of DC power injector similar to
>> what you need to make POE (Power Over Ethernet) devices work?
>>
>> Rob
>>
>>
>>> Assuming you have a power adapter attached to them.
>>>
>>> Unplug from wall jack, whilst the KLMs are flashing press the bottom two
>>> right buttons and the bottom two left buttons on each KLM (a total of
>>> four buttons on each KLM.) If done correctly, you should see the
>>> indicators go ON and OFF sequentionally.
>>>
>>>> What is the trick to make 2 KLM's work with the M7324? Do they need to
>>>> be
>>>> the same firmware Rev.?
>>>>
>>>>
>>>> Thanks,
>>>>
>>>> Rob
>>>>
>>>>
>>>
>>>
>>
>>
>
>



Similar ThreadsPosted
Nortel M7324 - Can't get the phone to ring October 12, 2006, 2:44 pm
SPEX-HS Module Error March 30, 2005, 3:52 am
One touch dial module October 6, 2006, 8:53 am
Baystack 460-24T-PWR Fiber Optic Module poblems August 4, 2005, 1:45 pm
Accelar/Passport 1200 XLR12040C ATM module May 21, 2006, 6:20 am
BCM Media Module power board on back. July 22, 2006, 5:55 am

other useful resources:
The Federal Communications Commission (FCC)
Telecommunications Industry Association
Electronic and Software Security Products and Services
International Telecommunication Union

Custom CGI Perl and PHP programming by 1-Script.com

Contact Us | Privacy Policy
The site map in XML format XML site map