|
Posted by Trendkill on March 5, 2007, 7:40 am
If you were Registered and logged in, you could reply and use other advanced thread options
On Mar 5, 1:57 am, edgar...@gmail.com wrote:
> I try to connect a Linksys switch to a live LAN with Cisco Switches, I
> connect with cross-over cable and he lights show fine, but I can get
> connection from clients, no internet no connection with the LAN. there
> is some config that I need to to on the Cisco Switch.??
>
> Thanks
>
> Edgard Rodriguez
No special config other than making sure its set to an access vlan
port and the vlan has a dhcp server in it so that the clients can get
an IP address. Also, and I'm sure this is probably not the case from
your information, but make sure its not a linksys router else you need
to connect the crossover to one of the switch ports (not the wan port)
and turn off dhcp on the linksys router.
| 
Yahoo! 
Google 
Windows Live 
del.icio.us 
digg 
Netscape 
XML site map