|
Posted by Martin Bilgrav on May 1, 2008, 2:05 pm
If you were Registered and logged in, you could reply and use other advanced thread options
>I am trying to setup my concentrator to connect to a PIX over the
> internet and create a tunnel.
>
> I have used directions here:
>
http://www.cisco.com/en/US/products/hw/vpndevc/ps2284/products_configuration_example09186a00800949d2.shtml
>
> the remote end, the pix is all setup, but they can not ping any
> devices on my end. We have setup a route on our core router....still
> nothing.
>
> looks like I can get through step 6 OK on the instructions, but step
> 7, I never get anywhere that has an apply.
>
> Any one offer any help?
hard with no posted actually configs.
But if you use NAT applt ISAKMP NAT-T command in both ends.
HTH
Martin
| 
Yahoo! 
Google 
Windows Live 
del.icio.us 
digg 
Netscape 
XML site map