|
Posted by Doug McIntyre on August 2, 2006, 10:04 am
If you were Registered and logged in, you could reply and use other advanced thread options
dennis@tibinc.com (Dennis ) writes:
>I have several Axxess IP phones and need to get into the setup to
>change the network configuration (change from DHCP to fixed IP
>address). I used to have the procdure written down but have lost it.
>It involves an entry on the keypad as the unit is powering up. Does
>anyone have this imformation handy?
Press 7 & 8 while the phone powers on.
|