|
Posted by Doan on March 13, 2008, 2:36 pm
If you were Registered and logged in, you could reply and use other advanced thread options
Yes. IPSec is IP only, no multicast. Since EIGRP uses multicast to
exchange routing info, it won't work. As suggested, the solution is
IPSec + GRE.
Doan
On Thu, 13 Mar 2008, a wrote:
> Is that means, if I just set up the Phase 1 and phase 2 and the eigrp, bu=
t
> no other things; the routing protocol will not go through. Then, the empt=
y
> routing table is not able to direct the packets to the correct hop. Am I
> right?
>
> Thanks
>
> :13tf7bmmhndsgf0@corp.supernews.com...
> > create an ipsec encrypted gre tunnel betweeen the routers in order to
> > exchange dynamic routing information, your ipsec-isakmp ACL will handle
> the
> > LAN to LAN traffic over the tunnel
> >
=2E.
> > > Hi
> > >
> > > I need to set up an IPSec connection between 2 router for the traffic
> > > between 2 subnets behind. Besides, setting up the Phase 1, phase 2
> > > including
> > > all the ACL, transform....., how should I set the route between the
> > > subnet?
> > > static route or eigrp? How should I set the access list to let the
> routing
> > > protocol get through the IPSec?
> > >
> > > Thanks
> > >
> > >
> >
> >
>
>
>
>
| 
Yahoo! 
Google 
Windows Live 
del.icio.us 
digg 
Netscape 
XML site map