|
Posted by Renegade on April 25, 2007, 7:34 pm
If you were Registered and logged in, you could reply and use other advanced thread options
I'm not sure as I've never seen an 1120e, but on the 1140e when the
Nortel logo comes onto the screen you must press the 4 soft keys under
the screen in order one at a time from left to right.
Cheers and good luck.
> I can't even get to the setup screen on the 1120E to input TN and node ID.
> Is there a key sequence that I am missing? There seems to be nothing in the
> users manual or any online guides that I have found that tells me this.
>
> Thx again...
>
> John Mitchell
>
>
>
>
>
> > If you mean that the switch won't accept 1120e as a type, that is correct.
> > The 1120e is for all intents and purposes an i2002, and is programmed as
> > such. The 1140e is programmed as an i2004.
>
> > While we are on the subject , has anyone else noticed the inability to
> > adjust the ring on 1120e's? The ring is loud, and as you approach low
> > ring volume, it gets really low. Turning it back up results in a sudden
> > jump to loud volume, rather than what the volume steps would indicate.
> > We're running c39 firmware. We've got around 700 of them that exhibit this
> > problem.
>
> >> Hi gang, I have an "IP PHONE 1120E" that I am attempting to program and
> >> get running on our M1 61C running Succession 4.5.
>
> >> I have no issues with the I2004 sets but for some reason I am getting
> >> nowhere with the 1120E. Can someone help me out? How do I program this
> >> set and have the M1 recognize it.
>
> >> Thanks in advance
>
> >> John Mitchell- Hide quoted text -
>
> - Show quoted text -
| 
Yahoo! 
Google 
Windows Live 
del.icio.us 
digg 
Netscape 
XML site map