|
Posted by C:\Marko on November 8, 2006, 8:33 am
If you were Registered and logged in, you could reply and use other advanced thread options
Hi,
I recommend that You use something with more power.
Some P II or P III (or some old Duron) will be more than enough (128 or 256
MB RAM, CPU 533 MHz or more)
Basically, it depends on lot of things like codecs You're using, do You
have transcoding, IVR, voicemail system, GUI,databases, termination cards,
...
BR
Marko
On 8 Nov 2006 05:06:19 GMT, John L wrote:
> I currently have a couple of inbound VoIP numbers from Voxbone
> terminating on a voip phone on my desk. It works fine, but if I'm not
> here, there's no voicemail, there's no way to divert the calls to my
> cell phone, etc. So I figure I can run Asterisk on an old PC and do
> all that.
>
> For a low end application like this, never more than one or two calls
> active at once, how much of a PC do I need? I have an old 200 MHz
> Pentium which I've been using as a BSD router. Will that be adequate,
> or do I need something faster?
>
> R's,
> John
| 
NewsGroups 
Yahoo! 
Google 
Windows Live 
del.icio.us 
digg 
Netscape 
XML site map