|
Posted by on November 27, 2007, 12:24 am
If you were Registered and logged in, you could reply and use other advanced thread options
I have a NETGEAR ProSafe FVS328 router. I am trying to configure it to
serve remote clients who wish to connect to my LAN.
I carefully followed the instructions here:
http://kbserver.netgear.com/kb_web_files/n101418.asp
I am not at the stage yet of even attempting to install a VPN client
software on a PC in order to test the above. I am trying to check/
verify each step and I thought that the first confirmation that
something has changed (properly) on my router is that a simple port
scan via a web site like http://www.grc.com would at least reveal port
500 (IKE) as being "unstealthed".
However, the ShieldUp test shows that all ports in my Internet
connection are still stealthed.
How do I approach this problem correctly?
Thanks,
Alex
P.S. My NETGEAR FVS328 router is connected to the Internet via a
Westell 327 DSL modem/router. I "disabled" its router by configuring
it to pass "Single Static IP" (aka IP Passthrough) to the FVS328. I
hope that this is the right way to go.
| 
NewsGroups 
Yahoo! 
Google 
Windows Live 
del.icio.us 
digg 
Netscape 
XML site map