|
Posted by Bill on September 18, 2007, 6:33 pm
If you were Registered and logged in, you could reply and use other advanced thread options And, if he's got a TMDI, he'll need to kill MSDL x
Also, do not re-enable the DCH. If you enable the loop, it should bring up
the DCH automatically.
> disable the dch in 96, it is dis dch x
> then disable the loop in 60 it is disl x
>
>> Can some help me with disabling and enabling the D-CH and DTI card on
>> Option 11c. The DCH # is 4. I can' t remember if it's all done in LD 96
>> or LD 96/LD 60.
>>
>
>
|