|
Posted by DC on July 7, 2008, 10:18 am
If you were Registered and logged in, you could reply and use other advanced thread options
Does anyone know what could cause the error below. It's on a
WS-C3750G-24TS-E with
flash:c3750-ipservicesk9-mz.122-25.SEE/c3750-ipservicesk9-mz.122-25.SEE.bin
!!! WARNING: The switch is not usable !!!
Reason:
Error unsupported TCAM value size
Actual value = 1, Expected value = 40
|
 
| |
Posted by Thrill5 on July 7, 2008, 9:20 pm
If you were Registered and logged in, you could reply and use other advanced thread options
Does it boot without loading the configuration. If so, check the "SDM
profile" in the startup-config.
> Does anyone know what could cause the error below. It's on a
> WS-C3750G-24TS-E with
> flash:c3750-ipservicesk9-mz.122-25.SEE/c3750-ipservicesk9-mz.122-25.SEE.bin
>
> !!! WARNING: The switch is not usable !!!
> Reason:
> Error unsupported TCAM value size
> Actual value = 1, Expected value = 40
|
|
Posted by DC on July 8, 2008, 11:04 am
If you were Registered and logged in, you could reply and use other advanced thread options
> Does it boot without loading the configuration. If so, check the "SDM
> profile" in the startup-config.
No idea (although it apparently had the "factory default" configuration).
It was on eBay
<http://cgi.ebay.com.au/ws/eBayISAPI.dll?ViewItem&item=260257237196&_trksid=p2759.l1259>
Someone eventually bought it for $550 Australian. I don't know if they
got a bargain or blew their money.
I wonder if the original owner knew that the 3750 comes with a lifetime
non-transferable warranty?
|
|
Posted by Patrick on August 7, 2008, 3:45 am
If you were Registered and logged in, you could reply and use other advanced thread options
We also have a cisco 3750G-48-TS with same problem. I already tried to
do a IOS upgrade but without result.
The switch is not usable now. Is there a way to fix this?
--------Hereby also a the ouput from the switch------
Restricted Rights Legend
Use, duplication, or disclosure by the Government is
subject to restrictions as set forth in subparagraph
(c) of the Commercial Computer Software - Restricted
Rights clause at FAR sec. 52.227-19 and subparagraph
(c) (1) (ii) of the Rights in Technical Data and Computer
Software clause at DFARS sec. 252.227-7013.
cisco Systems, Inc.
170 West Tasman Drive
San Jose, California 95134-1706
Cisco IOS Software, C3750 Software (C3750-IPBASEK9-M), Version
12.2(25)SEE4, RELEASE SOFTWARE (fc1)
Copyright (c) 1986-2007 by Cisco Systems, Inc.
Compiled Mon 16-Jul-07 03:24 by myl
Image text-base: 0x00003000, data-base: 0x01040000
Initializing flashfs...
flashfs[1]: 1 files, 1 directories
flashfs[1]: 0 orphaned files, 0 orphaned directories
flashfs[1]: Total bytes: 32514048
flashfs[1]: Bytes used: 7216128
flashfs[1]: Bytes available: 25297920
flashfs[1]: flashfs fsck took 1 seconds.
flashfs[1]: Initialization complete....done Initializing flashfs.
Checking for Bootloader upgrade.. not needed
front_end/ (directory)
extracting front_end/fe_type_1 (34696 bytes)
extracting front_end/fe_type_2 (54584 bytes)
extracting front_end/front_end_ucode_info (86 bytes)
extracting ucode_info (76 bytes)
POST: CPU MIC register Tests : Begin
POST: CPU MIC register Tests : End, Status Passed
POST: PortASIC Memory Tests : Begin
POST: PortASIC Memory Tests : End, Status Passed
POST: CPU MIC PortASIC interface Loopback Tests : Begin
POST: CPU MIC PortASIC interface Loopback Tests : End, Status Passed
POST: PortASIC RingLoopback Tests : Begin
POST: PortASIC RingLoopback Tests : End, Status Passed
Waiting for Stack Master Election (around 30 seconds)...
POST: PortASIC CAM Subsystem Tests : Begin
Error unsupported TCAM value size
Actual value =3D 1, Expected value =3D 40
POST: POST Pre Init Test Failed
POST: PortASIC CAM Subsystem Tests : End, Status Failed
POST: CAM test failed
POST Failed: disabling stack links and shutting down SDP
driver class subsystem initialization failed
This product contains cryptographic features and is subject to United
States and local country laws governing import, export, transfer and
use. Delivery of Cisco cryptographic products does not imply
third-party authority to import, export, distribute or use encryption.
Importers, exporters, distributors and users are responsible for
compliance with U.S. and local country laws. By using this product you
agree to comply with applicable laws and regulations. If you are
unable
to comply with U.S. and local laws, return this product immediately.
A summary of U.S. laws governing Cisco cryptographic products may be
found at:
http://www.cisco.com/wwl/export/crypto/tool/stqrg.html
If you require further assistance please contact us by sending email
to
export@cisco.com.
cisco WS-C3750G-48TS (PowerPC405) processor (revision C0) with 118784K/
12280K bytes of memory.
Processor board ID FCZ1017Y0AY
Last reset from power-on
The password-recovery mechanism is enabled.
512K bytes of flash-simulated non-volatile configuration memory.
Base ethernet MAC Address : 00:17:5A:CC:FB:80
Motherboard assembly number : 73-9366-08
Power supply part number : 341-0107-01
Motherboard serial number : FOC10113NU3
Power supply serial number : AZS101200LC
Model revision number : C0
Motherboard revision number : A0
Model number : WS-C3750G-48TS-S
System serial number : FCZ1017Y0AY
SFP Module assembly part number : 73-7757-03
SFP Module revision Number : A0
SFP Module serial number : CAT10040RT4
Top Assembly Part Number : 800-25409-02
Top Assembly Revision Number : B0
Version ID : V02
CLEI Code Number : CNMWU00ARB
Hardware Board Revision Number : 0x05
!!! WARNING: The switch is not usable !!!
Reason:
Error unsupported TCAM value size
Actual value =3D 1, Expected value =3D 40
Unable to create l2trace server process, socket_open() failed=07
Press RETURN to get started!
00:00:43: %SPANTREE-5-EXTENDED_SYSID: Extended SysId enabled for type
vlanCannot Get the number of ports in MAC notification
00:00:43: %SW_VLAN-4-IFS_FAILURE: VLAN manager encountered file
operation error: call =3D ifs_read_until (header) / file =3D / code =3D 21
(Is a directory) / bytes transfered =3D -1
-Traceback=3D AFFD58 1A7FB0 1A4048 909AAC 90000C
00:00:45: %SYS-5-RESTART: System restarted --
Cisco IOS Software, C3750 Software (C3750-IPBASEK9-M), Version
12.2(25)SEE4, RELEASE SOFTWARE (fc1)
Copyright (c) 1986-2007 by Cisco Systems, Inc.
Compiled Mon 16-Jul-07 03:24 by myl
00:00:45: Unable to open UDP socket on CMP_PORT
00:00:50: %SYS-2-CHUNKINVALIDHDR: Invalid chunk header type 31744 for
chunk 0, data 2C032000
-Process=3D "HULC multifs process", ipl=3D 0, pid=3D 38
-Traceback=3D AFFD58 E4BF84 575C98 576DE8 577F54 50D3EC 50D764 909AAC
90000C
!!! WARNING: The switch is not usable !!!
Reason:
Error unsupported TCAM value size
Actual value =3D 1, Expected value =3D 40
Switch>
|
|
Posted by Merv on August 7, 2008, 9:53 am
If you were Registered and logged in, you could reply and use other advanced thread options
It is a hardware failure
|
| Similar Threads | Posted | | Re: Q: Cisco AP 1131 -- "Unsupported device type" error in Cisco Network Assistant | November 27, 2007, 1:19 pm |
| Cisco 7960 tftp size error. | September 13, 2005, 12:25 pm |
| Typical Read/Write times for a TCAM | February 15, 2007, 4:55 pm |
| unsupported wic cards | July 3, 2006, 12:58 pm |
| Unsupported Command Found | October 17, 2005, 7:01 pm |
| attaching ipv6 access-list to class-map unsupported ? | June 10, 2008, 4:34 am |
| OSM BLADE ERROR - %INTR_MGR-3-BURST: HY_LS_SV_INTERRUPT[0x1] local RBus FCS2 error [12] | May 11, 2006, 5:59 pm |
| VPN 3005 Error updating group for LAN-to-LAN connection (Too Many Entries Error. Delete an entry before adding a new one). | August 25, 2006, 2:25 am |
| ISDN Se2:15 **ERROR**: call_cleared: VOICE ERROR: NULL VDEV Common(0xFC): bchan -1, call id 0x8054 | December 19, 2005, 11:29 am |
| Failed Authentication, Status "Unsupported Authentication Algorithm" | November 26, 2004, 5:20 am |
|
|
Yahoo! 
Google 
Windows Live 
del.icio.us 
digg 
Netscape 
XML site map