|
Posted by Scott Perry on July 27, 2007, 9:46 am
If you were Registered and logged in, you could reply and use other advanced thread options
The unit in the delay command is tens of microseconds.
1000 microseconds = 1 millisecond
500 tens of microseconds = 5 millisecond (5ms) delay
Referenced:
Cisco Cookbook, O'Reilly Press
also
http://www.cisco.com/univercd/cc/td/doc/product/software/ios122/122cgcr/fiprrp_r/1rfeigrp.htm#wp1018435
--
===========
Scott Perry
===========
Indianapolis, Indiana
________________________________________
> If the problem says that the delay is 5ms, shouldn't the EIGRP delay
> component of the metric be set to "500" (tens of microseconds)? Searching
> a bit, I found all sorts of weird solutions (from 0.5 to 5000).
>
> Thanks
>
| 
Yahoo! 
Google 
Windows Live 
del.icio.us 
digg 
Netscape 
XML site map