|
Posted by on October 26, 2006, 4:00 pm
If you were Registered and logged in, you could reply and use other advanced thread options
This is for any other folks out there who have access to a Nortel DMS
GSP.
We're running alot of traffic through our switch, and our CPSTAT shows
:
>cpstat
CATMP/HR UTIL ENGCATMP MAXCATMP COMPLEX ENGLEVEL CCOVRLD IDLE
337080 72% 461924 580526 256 BELOW OFF YES
SCHED FORE MAINT DNC AUXCP OM GTERM BKG NETM SNIP
65% 22% 18% 0% 2% 9% 1% 84% 0% 2%
If you note the field MAXCATMP, we are showing a max call attempts per
hour of 580,000 calls. This value fluxuates, sometimes going below
500k, and 580 is about the highest I've seen.
What I'm looking for is to see a cpstat from another Nortel DMS GSP, to
compare what kind of MAXCATMP other switches have.
I'm wondering if our semi-complex routing schemes are impacting CPU
usage / max call attempts.
I realize that I could be comparing apples to oranges as not all DMS's
are built the same, but I would be very curious still.
SUMMARY:
If you have access to a Nortel DMS GSP, please type the command
'CPSTAT' at your CI: and post it here.
Thanks!
| 
Yahoo! 
Google 
Windows Live 
del.icio.us 
digg 
Netscape 
XML site map