|
Posted by icon256@gmail.com on June 8, 2005, 9:14 pm
If you were Registered and logged in, you could reply and use other advanced thread options
Do you mean the Model WGR614 from Netgear. Also, tell me about the
spec from the box. Ex. 108mbps, or 54mbps, and if it is 2.4 Ghz. Make
sure that your router can handle backwards compatibility to your
recieving devices such as, if your Router is 108mbps or 802.11g.
Can you tell us more about your settings. Did you try, having the
router set automatically the DHCP Server to distribute IP addresses to
the LAN network. Please post more, I will try, personally to help you.
FJDx wrote:
> I have just bought a Netgear WG614 router with a Netgear WG511. My OS is
> WinXP Home SP2.
>
> I am having problems connecting. Sometimes I connect and it can be online
> for hours. Other times it keeps cutting out and the only way I can get
> back on is to unplug the router for a minute and put it back on. I get
> various error messages including:
> Limited resources...the network did not assign a network address...
> Could not renew IP address
>
> Sometimes it logs on but there is no traffic at all, sometimes I cannot
> even log on even though I can see the network when I go to View Available
> Wireless Networks
>
> Sorry if I am not including enough details but I am new to this and have
> tried to read through the manual and troubleshoot but have found it very
> confusing.
>
> My router settings are...
> Internet IP Address: get dynamically from ISP
> DNS Address: get automaticaly from ISP
> Router MAC Address: use default address
>
> I use NTL cable broadband.
|